KRISHNA DX-HC
CAPACITY: 3000 LITRES
Bulk Milk Cooler 3000 Liters
| SR.NO. | ITEM | MAKE | OTHER DETAIL | QUANTITY |
| 1 | HERMETIC SEALED COMPRESSOR | EMERSON COPELAND | KCG-554 | 2 NOS. |
| I. | Kcal / Hr. | 22680 | ||
| II. | KW | 7.2 Amp each X 2 | ||
| 2. | NAME OF REFRIGERANT | R-22/404/407-C | 12 Kg.-14 Kg. | |
| 3. | AGITATOR MOTOR KW | WARM GEAR MOTOR | ¼ H.P | 1 NO. |
| RPM OF AGITATOR | 21–30 RPM | |||
| 4 | CONDENSING UNIT | 2 NOS. | ||
| I. | TYPE | AIR COOLED | ||
| II. | MATERIAL OF CONSTRUCTION | COPPER PIPE | ||
| III. | FAN | 3.4 AMP. | 4 NOS. | |
| 5. | CONTROL PANEL | |||
| I. | ELECTRICAL CONTACTOR 440 V | L & T | ||
| II. | RELAY | L & T | ||
| III. | LP/HP CUTOUT | SEALED | ONE EACH | |
| IV. | DIGITAL TEMPERATURE INDICATOR | SUB-ZERO OR EQUIVALENT | ONE | |
| 6. | THERMOPLATE (DIMPLE SS SHEET) | OMEGA/IMPORTED | OMEGA/ IMPORTED | TWO |
| MATERIAL OF CONSTRUCTION | AISI 304 SS | |||
| 7. | SS TANK WITH COVER | MAHAVIR | AISI 304 SS | |
| I. | Dimple plate thickness | 2 MM/0.8 MM | ||
| dimension of tank | ||||
| II. | Rated Capacity-liters | 3000 LTRS. | ||
| III | Gross Capacity –liters | 3300 LTRS. | ||
| Model | DX-HC | |||
| Thickness inner/outer | 2MM / 1.5MM | |||
| INSULATIONS | ||||
| Thickness of insulation | 50 MM | |||
| Material of insulation | POLYURETHANE @ 40 DENSITY |
CAPACITY: 3000 LITRES
KRISHNA DX-CV/HSC
| SR.NO | DESCRIPTION | SPECIFICATION |
| A | REFRIGERATION UNIT | |
| 1 | TYPE | DIRECT EXPANSION |
| 2 | MAKE OF COMPRESSOR | EMERSON COPELAND |
| 3 | MODEL | KCG-572 X 2 |
| 4 | NO. OF COMPRESSOR | TWO |
| 5 | COOLING CAPACITY | 22680 Kcal /Hr. |
| 6 | NO. OF FAN | 4 NOS. |
| 7 | TYPE OF REFRIGERANT | R-22/ 404/407-C |
| B | MILK TANK AISI 304 SS | |
| 1 | RATED CAPACITY | 3000 LTRS. |
| 2 | GROSS CAPACITY | 3300 LTRS. |
| 3 | MODEL | KRISHNA DX – CYLINDRICAL |
| 4 | MAKE | MAHAVIR |
| 5 | MATERIAL OF CONSTRUCTION | AISI – 304 |
| 6 | FINISH | 220 GRITT |
| 7 | TYPE OF TANK | CYLINDRICAL |
| 8 | THICKNESS OF SHEET | INNER 2 MM / OUTER 1.5 MM |
| 9 | RPM & NO. OF AGITATOR | 21-30 RPM |
| 10 | CIP | SPRAY BALL ARRANGEMENT |
| 11 | TYPE OF INSULATION | BY INJECTION – HIGH DENSITY 40 KG / CU. M |
| 12 | THICKNESS OF INSULATION | 50 MM MINIMUM |
| 13 | EFFICIENCY OF INSULATION | AS PER ISO 5708. |
| C | DESIGN PARAMETER | |
| 1 | AMBIENT TEMP. | 380C |
| 2 | MAX. COOLING TIME | For first milking 3.0 HOURS/ for second milking 1.5 hrs |
| 3 | MILK TEMP. RANGE | 350C TO 40C. |
| 4 | POWER REQUIREMENT | THREE PHASE |
| D | CONNECTED LOAD | COMPRESSOR – 2 X 8.6 AMP. |
| CONDENSERS FAN – 4 X 0.85 AMP. | ||
| AGITATOR – 0.35 AMP. |