Bulk Milk Cooler 2500 Liters

KRISHNA/DX-HC

CAPACITY: 2500 LITRES

SR.NO.	ITEM	MAKE	OTHER DETAIL	QUANTITY
1	HERMETIC SEALED COMPRESSOR	EMERSON COPELAND/DENFOSS	RECIP / SCROL	2 NOS.
I.	Kcal / Hr.
II.	KW		7.2 Amp each X 2
2.	NAME OF REFRIGERANT	R-22/404/407 -C
3.	AGITATOR MOTOR KW	WARM GEAR MOTOR	¼ H.P	1 NO.
	RPM OF AGITATOR		21–30 RPM
4	CONDENSING UNIT			2 NOS.
I.	TYPE		AIR COOLED
II.	MATERIAL OF CONSTRUCTION		COPPER PIPE
III.	FAN		3.4 AMP.	4 NOS.
5.	CONTROL PANEL
I.	ELECTRICAL CONTACTOR 440 V	L & T
II.	RELAY	L & T
III.	LP/HP CUTOUT	SEALED		ONE EACH
IV.	DIGITAL TEMPERATURE IICATOR	SUB-ZERO OR EQUIVALENT		ONE
6.	THERMOPLATE (DIMPLE SS SHEET)	IMPORTED	IMPORTED	TWO
	MATERIAL OF CONSTRUCTION		AISI 304 SS
7.	dimension of tank
I.	Dimple plate		IMPORTED
II.	Rated Capacity-liters		2500 LTRS.
III	Gross Capacity –liters		2700 LTRS.
IV	Model		DX-HC
V	Thickness inner/outer		2MM / 1.5MM
8.	INSULATIONS
I	Thickness of insulation		50 MM
II	Material of insulation		POLYURETHANE

CAPACITY: 3000 LITRES

KRISHNA/DX-CV/HSC

SR.NO	DESCRIPTION	SPECIFICATION
A	REFRIGRATION UNIT
1	TYPE	DIRECT EXPENSION
2	MAKE OF COMPRESSOR	EMERSON/DENFOSS
3	MODEL	ACCORDING COMPANY
4	NO. OF COMPRESSOR	TWO
5	COOLING CAPACITY	ACCORDING COMPANY
6	NO. OF FAN	ACCORDING COMPANY
7	TYPE OF REFRIGERENT	R-22 /404/407-C
B	MILK TANK AISI 304 SS
1	RATED CAPACITY	2500 LTRS.
2	GROSS CAPACITY	2700 LTRS.
3	MODEL	KRISHNA
4	MAKE	MAHAVIR
5	MATERIAL OF CONSTRUCTION	AISI – 304
6	FINISH	220 GRITT
7	TYPE OF TANK	CYLINDRICAL
8	THICKNESS OF SHEET	INNER 2 MM / OUTER 1.5 MM
9	RPM & NO. OF AGITATOR	21-30 RPM
10	CIP	SPRAY BALL ARRANGEMENT
11	TYPE OF INSULATION	BY INJECTION – HIGH DENSITY 40 KG / CU. M
12	THICKNESS OF INSULATION	50 MM MINIMUM
13	EFFICIENCY OF INSULATION	AS PER ISO 5708.
C	DESIGN PARAMETER
1	AMBIENT TEMP.	40⁰C
2	MAX. COOLING TIME	3.0 HOURS
3	MILK TEMP. RANGE	35⁰C TO 4⁰C.
4	POWER REQUIREMENT	THREE PHASE
D	CONNECTED LOAD	COMPRESSOR – 2 X 7.2 AMP.
		CONDENSOR FAN – 4 X 0.85 AMP.
		AGITATOR – 0.35 AMP.